[Aaug] Trunk Failure Notification

[Solomon, Arnold C.]

Chris:

The command "zap show channel <x>" will show a channel in alarm.  In the
example below the channel has lost loop current "is in alarm".

InAlarm: 1 (0 = false, 1 = true)

Hope this helps

Arnold

-----

>zap show channel 1

Channel: 1x*CLI>
File Descriptor: 18
Span: 1
Extension:
Dialing: no
Context: incoming
Caller ID string:
Destroy: 0
InAlarm: 1
Signalling Type: FXS Kewlstart
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: yes
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Actual Hookstate: Onhook 


-----Original Message-----
From: aaug-bounces at atlaug.com [mailto:aaug-bounces at atlaug.com] On Behalf
Of cfowler
Sent: Monday, February 05, 2007 1:46 PM
To: Aaug at atlaug.com
Subject: [Aaug] Trunk Failure Notification

The system is almost ready to go to be installed.  I've got 2 trunks
configured. 

#1.  FXO port on X100P (Inbound and Outbound)
#2.  Voipjet VOIP Trunk (Outbound only)

I have unlimited LD on #1 but have to watch #2.  Also #1 will be my main
line for incoming.  If that fails and the system routes to #2 can I be
notified via email?  For example if someone unplugs the phone line from
the FXO port can Asterisk tell me this?  Can  it tell me if it loses
connection to #2?



_______________________________________________
Aaug mailing list
Aaug at atlaug.com
http://lists.atlaug.com/mailman/listinfo/aaug