[Aaug] Automated Attendent

Odom, Steve steve.odom at verso.com
Mon Feb 5 00:30:03 EST 2007


Did you run genzaptelconf at the command prompt?
Steve

-----Original Message-----
From: aaug-bounces at atlaug.com [mailto:aaug-bounces at atlaug.com] On Behalf
Of Christopher Fowler
Sent: Saturday, February 03, 2007 10:24 PM
To: Scott Plante
Cc: aaug at atlaug.com
Subject: Re: [Aaug] Automated Attendent

I got it working.  I did not know that I would have difficulties dialing
the IVR from inside.  Since I've not configured Zap then I had no way of
testing.  When I configured a PC with an FXO tonight it worked
beautifully.   We seem to get what we wanted accomplished.  We were left
with 2 technical issues

1.  We uploaded a MP3 for music-on-old.  We could barely hear it and
    is was choppy.  Perhaps lowering the bitrate and quality would help
    since we do not want to push 128k over the connection anyway

2.  A "reboot" of the box forced a kernel panic when unloading the 
    Zap driver.  This would cause it to hang and require a hard reset.
    Maybe I need to update kernel and drivers?

It is working very nice.  I noticed that Louie had no LD on his
BellSouth line so we went to voipjet and signed up.  This was nice
because we was able to do follow-me with his cell phone.  

I'm going to install my hardware next week and run it to our DC on the
fast connection.  I will then be able to test it very well...  


On Sat, 2007-02-03 at 18:50 -0500, Scott Plante wrote:
> Once you hit the red bar, it should get written out to 
> extensions_additional.conf.
> It doesn't use your name, though. It'll be named ivr-1, ivr-2, etc.
> You typically use one as the destination for an inbound route or a 
> timecondition.
> You can create more that are destinations of the main one.
> 
> Christopher Fowler wrote:
> > I've done that but I'm not sure how to test to see if it is working.
> > I've goto one named 'AA' but I can't fine 'AA' in any log file
> > in /etc/asterisk.
> >
> > On Sat, 2007-02-03 at 17:21 -0500, Scott Plante wrote:
> >   
> >> For FreePBX, you set them up under Setup->IVR.
> >>     

_______________________________________________
Aaug mailing list
Aaug at atlaug.com
http://lists.atlaug.com/mailman/listinfo/aaug




More information about the Aaug mailing list